MoIP configuration for Araknis 210/310 Core switches
Note: Enable these settings on every managed switch on the network.
-
Navigate to Advanced > IGMP Snooping.
-
For Status, click Enabled.
-
Verify the Version is set to V2.
-
Set the Unregistered Multicast Behavior to Drop.
-
Under VLAN settings, enable IGMP Snooping Status on the VLAN ID the MoIP devices are configured on and verify Fast Leave is Disabled.
-
On core MoIP switches, set the Querier State to Enabled. Verify the Querier Version is v2.
Note: In Araknis x10 switch firmware v1.3.10 and earlier, IGMP Querier auto-election is currently unavailable. Set all edge switches to Querier Disabled to avoid issues.
A firmware update is in development to resolve this issue. -
Under Router Settings, at the bottom of the page, set the Router Ports Auto-Learned to Enabled on all VLANs.
If you're connecting another MoIP switch to this Core MoIP switch, use the Edge switch configuration guide for that particular switch model.